Lowe’s Sump Pump Installation Guide

Things To Keep In Mind When Installing Lowe's Sump Pumps

What are the things to keep in mind when installing a Lowe’s sump pump? You must always use a GFCI electrical outlet, place the pump 4 feet off the floor, and make sure to unplug the pump before reaching into the pit. 

Lowe’s offers a wide selection of pumps, including the 33-HP Thermoplastic Pedestal Sump Pump, which is corrosion-resistant, and features a hard steel drive shaft and pedestal base. It also has a metal switch arm.

Other things to keep in mind are given below. 

Things To Keep In Mind When Installing Lowe's Sump Pumps
Source: Lowe’s Sump Pump

Battery backups:

If you live in an area that has regular flooding, you may want to invest in a battery backup for your Lowe’s sump pump. Battery backups can save your investment in a costly sump pump if it fails during a storm or power outage. These backups also reduce your risk of flooding and provide peace of mind. However, you should know the risks associated with battery backups.

Before installing a battery backup, make sure it can run on its own. You can purchase a deep-cycle lead-acid battery. The AH rating indicates how many amps it can supply over a period of 20 hours. 

For example, a battery with 80 AH would provide four amps per hour for twenty hours. You can purchase a voltmeter at a hardware store.

If you choose a battery backup system for your Lowe’s sump pump, you’ll need to have a backup pump installed as well. It’s also a good idea to buy a new battery as well, which can last a couple of years. 

A battery backup should be replaced every two to three years, as continuous recharging can degrade the efficiency of the battery.

If you choose to install a battery backup for your Lowe’s sump pump, you can follow some simple plumbing tips. You’ll need to know about batteries and charging devices. If you’re not a plumber, it’s best to hire a plumber to install your battery backup. You can also choose to use a combination unit of a backup and primary pump. 

The combination unit will save you money because the backup pump will be nested together. This will eliminate the need to cut drainpipes and splice drainpipes.

Proper maintenance:

Maintaining your sump pump is critical to its proper operation. It should discharge water when it is running, but if it does not, there are several reasons for this. For example, there may be a stuck check valve or a jammed impeller. In such cases, you should immediately contact a plumber to get it repaired. A sump pump should cycle on and off during wet periods, and if it does not, it is past its prime.

If you notice brown or gray water coming out of your sump pump, this is probably due to corroded battery terminals or bacteria. It may also be due to iron-feeding Iron Bacteria. These bacteria will clog your plumbing system and cause your sump pump to malfunction. 

While they are not harmful to human health, they can cause problems for your drainage system. Remember that sump pumps are not meant to last forever. After seven years, they need to be replaced.

One of the most common causes of your sump pump running all the time is the switch. The switch is responsible for keeping the pump on or off. It needs to cycle on and off properly to remove water from the sump pit. 

Sometimes, the switch is tethered to the sump basin and may be prone to being hung up in the container. Other issues may include a short in the electrical system.

Fire hazard:

When it comes to a fire hazard, the Lowe’s brand of sump pump is not one to be taken lightly. These pumps require a discharge line to discharge the water and are often supplied with an extension hose. 

In cold weather, the extension hose may freeze, clogging the pump and causing the motor to burn out. While a sump pump is not dangerous to people, it should never be left unattended and should never be put on a floor.

In order to prevent a fire from occurring, be sure to install a safety manual with your sump pump. 

In addition, make sure you buy the correct size extension cord and install it correctly. You can also avoid fires by performing annual upkeep to keep your sump pump working efficiently. The pit area should be clean and free from debris. If there are any leaks, keep an eye on the pump’s workload.

A fire hazard in a sump pump can occur if the float becomes stuck or is not tethered to the sidewalls of the sump pit. 

This can lead to a burnt-out motor, which can cause smoke. Other factors can include the wiring in your home, which may be outdated. Using a sump pump with the wrong size is also dangerous because it can cause the sump pump to overwork itself and even catch fire.

Leave a Reply

Your email address will not be published. Required fields are marked *