Whether you’re looking to replace your old water fountain pump or you just want to add some water to your fountain, there are some things you need to consider. There are three main types of pumps available: External, Electric, and Solar. 

Before you buy one, think about the features you’d like your new pump to have, and then look for the size that suits your fountain. Remember to clean and maintain your fountain properly as well, and the better care you give your pump, the longer it will last.

Choosing a Water Fountain Pump

Water Fountain pump
Source: WPP

When choosing a water fountain pump, there are several factors to consider. There are three main types: submersible, solar, and self-priming. The type of pump you choose will depend on your preferences. 

Read on to learn about the benefits of each. Also, consider whether you want a pump with a pump motor or without a pump motor. Choosing the right pump for your fountain is crucial to its overall design and performance.

Submersible

The first thing to consider when buying a new Submersible water fountain pump is the GPH (Gallons per Hour) capacity of the pump. If the fountain is taller than five feet, it should be at least 100 GPH. 

Otherwise, it may not provide enough flow for your fountain. Also, make sure that the pump is the correct size for the fountain. Also, pay attention to the discharge size, which is a key consideration when choosing the right pump for your fountain.

For medium-sized fountains up to five feet tall, the Seven Master Ultra Quiet Submersible Water Fountain Pump is a great option. It features a two-outlet fitting and is adjustable from three to six feet. 

It also features an epoxy-encapsulated motor and stainless steel shaft. You can also take advantage of free delivery when you purchase this model. If you have small children, you might want to consider a low-wattage Submersible water fountain pump.

Electric

Before buying an electric water fountain pump, you should know a few things about them. One of the most important aspects to know is the discharge size. This refers to the size of the outlet on the pump, which should fit the tubing used for the fountain. 

Having the correct discharge size makes installation easier. Here are some things to look for in an electric water fountain pump. Read on to find out more! Listed below are some things to consider when choosing an electric water fountain pump.

The first thing to consider when buying an electric water fountain pump is the size. Make sure the pump is sized appropriately, especially for a medium-sized fountain. It should have at least one hundred to two hundred gallons of water output per hour. Another important factor is the lift. 

This will determine how much water the fountain can move. One general rule is to use a pump with an outlet that is an inch in diameter. Make sure the pump will fit the fountain, otherwise it will not function properly.

When installing an electric water fountain pump, there are several things to consider. First, determine how much water the fountain is expected to pump. The GPH, or Gallons Per Hour, of the pump will determine the amount of water it can push. Usually, this number is about 100 GPH for a one-inch fountain outlet. 

Also, you should consider the size of the pump’s discharge.

Be sure it can fit the fountain and its pipe.

Another option is to use solar energy to power your fountain pump. Solar pump systems have panels that collect the solar radiation and convert it to low-voltage electrical output. A charge controller protects the batteries from being overcharged during hours of darkness. This pump also uses batteries. 

To use solar power, you must place the panels in a place where they receive adequate sunlight. You should use a charger to prevent your fountain pump from running into power problems.

Once you have established how much water a fountain needs, the next step is deciding how much horsepower it should have. You can determine the horsepower of a pump by looking at the sticker that comes with it. The sticker should tell you the wattage and volts of the pump. 

Then, multiply that by the number of hours the fountain runs. Remember that a high-horsepower pump will use a lot of energy. It’s also important to take into consideration the size of the pump to keep your fountain at a reasonable size.

You should consider the size of the fountain before you buy an electric water fountain pump. If the fountain is large, you should choose a pump with a larger output than the one with a smaller one. 

Larger fountains require a pump with a 100-200 gallons per hour output. Smaller fountains may not require a large output. Smaller fountains may need a larger output. Then, you should consider the type of fountain and the location of the pump.

A good way to avoid wiring problems is to choose an electric water fountain pump that is compatible with your home’s wiring. Electric pumps are notoriously power-guzzlers, and if you have no outlets in your home, you’ll have to hire an electrician to run a conduit. 

Digging up an underground wiring is not only hard, but can also be dangerous. When it comes to choosing a water fountain pump, make sure you look for one with a long cord.

Solar

Source: WPP

When installed in a water fountain, a solar water fountain pump can produce a spraying motion of thirty to fifty centimeters. This effect is better with more sunlight and also increases the pH level of water. 

To use the solar water fountain pump, you should place it under a sunny window for at least an hour. After a while, you can leave it under a shady window to charge. There are four spray nozzles on the pump. These nozzles help in shaping a beautiful fountain.

Solar water fountain pumps have several benefits over electric fountain pumps. They’re more environmentally friendly, portable, and safer for kids. With a 0.9-meter head, solar water fountain pumps can be as close to free as the sun can get. 

To find the perfect pump for your water feature, check out the KWP Series spec comparison chart. For more information on the pump and panel package pricing, visit their website. You’ll be pleasantly surprised by the features and benefits of these solar water fountain pumps.

A solar water fountain pump’s efficiency depends on the amount of energy it can generate. While a solar water fountain pump is generally slower than an electric pump, it can generate high amounts of energy, even under low sunlight conditions. 

Because PV is expensive and intermittent, the efficiency of the pump’s solar panel is important. In order to achieve maximum efficiency, it must be as efficient as possible. The more solar panels, the more power the pump can produce.

While solar water fountain pumps are safe and environmentally friendly, the pump’s lifespan will be affected by the amount of sunlight it receives. While solar fountain pumps are designed to run in direct sunlight, they will not work properly under filtered light. 

You’ll need to make sure that your fountain gets enough sunlight to generate energy, so keep a clear view of it. You can also install a waterproof cover to protect it from rain and other harmful elements.

The size of the fountain is another important consideration. You can buy submersible pumps for fountains that are permanently placed in the ground, or battery operated models for fountains that are only placed on the surface. 

Depending on the size of your fountain, a solar water fountain pump with a high wattage is better suited for a garden or patio. You may also want to get a pump with a backup battery for when the sun is not available.

As the name implies, a solar water fountain pump is powered by solar energy, so the stronger the sun, the better effect. The solar water fountain pump also comes with a built-in 300mAh battery, so it can function even in the shade. To make sure it’s fully charged before use, the pump must be placed in direct sunlight for an hour or so. 

Before buying a solar water fountain pump, you should check out the pump’s jet and lift height. Both are crucial factors in creating the perfect water fountain. A solar pump with a low lift will not produce the right spray. 

The pump should have a high lift to get the water flowing in the desired direction. Moreover, you should choose the pump that will be compatible with the size of your fountain. If you’re looking for a pump that can produce more water than you need, it is best to get a bigger pump with higher lift.

External

There are two types of external water fountain pumps: inline and self-priming. Inline pumps require a water supply in the intake line to start working. External pumps must be situated at the level of the fountain or pond. If the fountain is located below the water level, gravity will maintain a full intake line. 

However, both types have some differences. Here are some tips to consider when choosing an external water fountain pump. We recommend a self-priming model to save time and hassle.

When selecting an external water fountain pump, you need to choose the size of the outlet tube. The inside diameter of the tube must be larger than the outside diameter. Choose a submersible pump if the pump is adjustable. 

Otherwise, it can cause splashing and other damage to your fountain. Make sure you purchase the correct size for the fountain’s outlet tube and spout. An external pump is also better than an internal one.

If you are considering purchasing a pump for a small fountain, you should look for a dual-voltage one. This pump will work with either 115 or 230 volts, so it will run smoothly in both. You can also choose a dual-voltage pump, like the Easypro External Low Head Pump – 4500GPH. 

This pump is shipped in 115-volt form, but you can choose to change it to 230-volts if you need to. However, keep in mind that dual-voltage pumps are not always cheaper.

When choosing an external water fountain pump, make sure you know the electrical requirements for your home. A pump that runs on 230 volts may not work well in concrete ponds. 

A pump that runs on two or three-wires will not look very nice. If you plan to use an external water fountain pump, you should consult with an electrician before purchasing one. If you are not comfortable doing the wiring yourself, hire a professional.

When choosing an external water fountain pump, it is crucial to consider the total dynamic head of the fountain. The max head height of the water feature will determine the flow power of the pump. 

Buying a low-head external water fountain pump is suitable for small ponds and fountains, but is not recommended for large water features. Alternatively, you may opt to go for a high-head external pump with a higher flow rate and lift height.

Self-priming

Source: WPP

One of the greatest features of a Self-Priming Water Fountain Pump is its energy efficiency. It uses less power than other pumps and maintains the same flow and head height, even when primed by itself. 

It is available in two voltage ranges, 115v and 230v, which make it great for both energy-saving and flexible voltage control. Read on to find out more about this great pump and its features!

To check whether a Self-Priming Water Fountain Pump is self-priming, simply turn it on and wait for it to draw in water. The pump should start filling its tank and the pressure gauge should rise. 

Afterward, you can check the operation of the pump by manually operating the valves. The pump should run for about a minute to prime itself. Once primed, you can close the lid of the pump and enjoy your water fountain.

Flow control mechanism

A water fountain pump’s ‘flow control’ mechanism varies the amount of water flowing through it. The pump’s motor is controlled by a micro-controller that stores and decodes program information. 

This micro-controller may send the information to a controller located in the pump’s water reservoir. The control signal may be in the form of a sound signal or can be generated directly. The controller may also send the data to other pump control units.

A water fountain pump has a number of features that can make the system easier to manage. A positive flow valve prevents the pump from overheating. It also bleeds jet flow back to the reservoir. 

Alternatively, a diaphragm-operated valve controls the pilot valve. Flow control valves can also be used to slow the flow of water in individual jets. It is important to know the head specification for each pump before purchasing one.

Warranty

A Water Fountain Pump usually comes with a three-year warranty. This warranty applies only if you purchased the pump from an authorized retailer. It does not cover consequential costs, such as labor and disposal. 

If your pump stops working due to misuse or accident, you may return it for a replacement or repair. If the warranty is not valid, you will have to pay for shipping and removal. Also, you will have to pay for the replacement pump if it is damaged due to improper installation or modification.

The pump seals are not covered by the warranty if they have been subjected to abuse. Seals can fail or leak, which may cause your water fountain to suck mud. These pumps are subject to normal wear, but if you operate them around the clock, you will greatly reduce their lifespan. 

Therefore, it is important to clean your pump regularly. Be sure to use clean water only when cleaning your pump. Make sure to store it properly if you intend to leave it in an exposed location.

Leave a comment

Your email address will not be published.