Water Freedom System – Creating Clean Water

water freedom system

Water Freedom System is a revolutionary method to supply clean drinking water to the regions that need it most.

Los Angeles County (LA) is a shallow water area in southern California with vast beaches. Here, the toxins in the rain contaminates ocean water. The amount of unpaved surface in a city depends on the amount of wastewater pollution. An opaque coating is all that prevents water from falling to the floor, e.g. B. streets, pavements, parking lots and buildings.

In LA, most people know how to avoid storms on the beaches because they can be harmful to all kinds of health problems, including B. skin rashes, gastrointestinal problems, and even pink eyes. Southern California is just a place where sewage affects the quality of the beach. The US Environmental Protection Agency estimates that over 10 trillion gallons of untreated rainwater flow into the annual surface waters of the country.

Source: Water Freedom System Reviews

When collecting rainwater, the result is double. 

Drainage does not get into waterways that contribute to pollution, and the collected water can be treated and used for a variety of purposes, including drinking water. Communities in Southern California already use urban wastewater for reuse. These reuse systems require advanced water purification technologies, including ozone purification, UV light, and membranes.

What is Water Freedom System

Recently, phosphorus has attracted a lot of media attention as an impurity. Water Freedom System intends to provide an introduction to this topic. This article explains in detail what phosphorus is, why we should use it and how it enters the water system. We also reviewed the problems related to excess phosphorus and constructive ways of solving these problems by states and communities.

To be scientifically correct, phosphorus is an element; Because we often use it in water and media management, it refers to phosphorus or phosphate (PO4) compounds. In elemental form, phosphorus is highly toxic, but its compounds are essential for Earth. Phosphorus is the “glue” that binds the sugar that forms the basis of DNA.

Also, phosphates in plants are necessary for nutrient uptake, flower formation, and photosynthesis. There are three types of phosphates – orthophosphates, polyphosphates (or metaphosphates) and organic phosphates. 

Source: San Antonio Magazine

Orthophosphates are associated with natural processes, fertilizers, and wastewater treatment. 

We commonly use polyphosphates in detergents, but when we add it to water, the polyphosphates change into orthophospates. Organic phosphates are phosphates that plants consume. They actively bind to plant material and are therefore rarely “free” in water systems.

In addition to the above-mentioned detergents that can enter the water system through partially treated domestic and industrial wastewater and phosphates that naturally escape from rocks and soil, agricultural and municipal wastewater is important for phosphate river basins. In particular, agricultural fertilizers and lawn care products break down to release phosphate in the soil. 

Since plant growth may be limited by the amount of phosphorus present in the soil, the use of fertilizers has become common. Which increases the amount of available phosphorus. And thus increases yields. Because phosphates are water-soluble, plants do not absorb phosphates, which tend to run with rainwater after heavy rain. In this way, phosphates often get into streams, rivers, rivers and urban areas to the sewage system. Although the main goal is to use products enriched in phosphates, in particular, to increase food availability, problems arise when excess phosphate enters the water system.

Yemen is running out of water

Yemen has been the subject of much daily news as a source of suspicion of Al-Qaeda air bombs. In addition to the prohibition of Western countries supporting terrorism on the Arabian Peninsula, this small nation has other problems besides non-profit information services, according to the 2010 research and development network.

The report by McKinsey & Company is the largest international consulting company. That alone immediately makes it credible. Yemen’s water availability study was part of a larger project though. It was commissioned by the Yemeni government to define the government’s ten priorities for the next decade. The preliminary draft report was published on September 24. 

According to the report, the capital of Yemen, Sana, will remain unchanged until 2025.

The impending water disaster in Yemen is because of the poor water management practices in the country. Further exacerbated by almost total reliance on freshwater to support agriculture.

Yemen has no rivers, no rivers. This means that freshwater only comes from groundwater and rainfall. Agriculture, which is always difficult in dry conditions, consumes 90% of the freshwater supplied to Yemen. Even worse, most water-consuming agriculture is a plant called khat, which produces leaves that are chewed or used to brew tea. Cato’s appeal is that the leaves contain stimulating cathinone, a substance that is illegal in the US and is covered by the Controlled Substances Act but is widely used in Yemen. Chewing causes cocaine-like effects. Khat is grown very often because it is more profitable cultivation than food crops such as wheat. He also earns about five times more than fruit.

The growing Kata alone consumes twice as much water as the entire Yemeni population. Random wells were drilled throughout the Arab Kingdom to support production to irrigate Kato fields, causing problems in controlling the country’s water supply.

Water Freedom System – 10 reasons to choose a water dispenser with mains operation

Source: Electrical Equipment

No space is lost:

After installing, you can forget them. They do not require any maintenance on the part of the user, except for occasional cleaning. Therefore, there are no hidden costs associated with using it. There are no full or empty bottles that will take up unnecessary space or cause a mess in space.

Risk of injury reduced: 

Negative health and safety hazards when moving or replacing heavy bottles.

Easy to use: 

By renting a water dispenser, you have no hidden or unexpected workload when rebuilding consumables or performing repairs or maintenance.

Hygienic and safe: 

Because there are no manual operations, such as replacing bottles that touch your hands with parts of the draining equipment, the risk of contamination is reduced.

Better taste:

The filter system in our water dispensers ensures that the water will be as fresh as spring water. The difference cannot be seen in the blind taste tests.

There is no danger of algae pollution: 

Bottled water, stored for a long time in the sunlight, will cause algal blooms. Although not dangerous, it looks terrible like pond water! Since tap water is always fresh, there is no risk of algae leakage.

Absolute comfort: 

Tap water dispensers can be placed close to employees’ jobs, even if they are away from the power source. Bottles with bottles should be transported from the collection point to the storage place and then to the place of the water dispenser. Water Freedom System Legit In some offices, this may mean carrying bottles through offices and stairs, causing stress in the workplace.

They help the environment: 

When you use the water dispenser, these are not plastic bottles. This means that you don’t get plastic that uses energy and increases carbon emissions. There are no discarded bottles that could cause recycling and disposal problems. There are no transport-related supplies, and further increases will result in CO2 emissions.

And of course cheaper: 

They supply and maintain high-quality work equipment without installation costs and only a small weekly rent. Their basic philosophy is to offer a service that consistently exceeds customer expectations.

Water supply companies – decreasing revenues and increasing costs

Source: World Bank Blogs

This unbelievable situation is caused by a complex set of circumstances, including lower demand, changing sources of income and fixed costs of maintenance and equipment. The tools have tried to minimize their costs, but the problem has not yet been fully resolved. Water users – almost every household and company in the US – must find ways to better manage or maintain their finances.

Many companies have limited or stopped using their services during a global recession. 

To the extent that these companies were water consumers, their demand in the industry dropped. Before the recession, many companies were the main recipients of water, including metalworking, assembly, and food and beverage production. Each of these industries, and more specifically the industry, consumed water in a way that most consumers would not like: cutting off water, heating, and cooling. 

Such process water causes two voltages in the water system; the need for water alone and the need for wastewater treatment after use. Water companies have responded to this tension by building modern wastewater treatment plants and expanding spring fields. However, as business demand declined, these expensive devices still needed maintenance, although they were underused.

Families affected by the recession also began to receive; Less frequent water lawns, otherwise try to keep your bills low. This business, like a business, had a big impact on operating costs. Water Freedom System eBook The pumps required significantly less electricity to operate and less wastewater to treat, but the operating costs of the systems were largely determined.

The problem was compounded by a huge drop in sales of new constructions and development. 

Before the recession, developers paid fees for redirecting water and sewer pipes to new departments and business areas. 

In some cases, these millions of dollars increased to several hundred thousand several years ago. Most utilities seem to have incurred this income in their total operating costs, and their consumers are more successful when the economy has weakened.

How Water Freedom System works?

Source: Gill Sensors and Controls

Food Consumption

If you want your body to burn more calories, you need to speed up your metabolism. It would be easy for you to lose weight by following a few simple rules:

Try to eat small portions 5 times a day. The key should be breakfast and lunch. In this case, your body has enough time for digestion. Green tea, peppers, grapefruit, lemon, algae and green vegetables accelerate metabolism.

Water! Increase your daily water intake and I mean clean water! The secret is that when our body lacks fluid, our liver is overloaded and fat cannot burn effectively.

Make sure you have enough time to sleep. Normal sleep helps you lose weight. Some studies have proven this. So sleep well not only on weekends but on weekdays!

Physical Activity

Nature. Try to run for at least 25-30 minutes until you feel unwell, preferably in parks or near water. Fresh air is very helpful, helps you sleep well and burns fat.

There is no need for physical exercise, but you don’t have to work hard either. All physical activity helps, but it must be constant. Even 5-10 minutes a day will help you control your weight until your body gets used to it. Active sex – Of course, it burns calories and improves metabolism. Massage significantly speeds up metabolism! This is the reason why you can enjoy pleasure and benefits.

Water X Water

Hot steam or sauna are the most effective ways to speed up metabolism and slimming. Even in three sessions, you can lose a lot of calories by sweating. Not to mention that during these procedures you cleanse yourself of all negative energies and influences and improve your mind and emotional state.

Contrast showers are very effective at burning fat. The basic rule: let your body gradually get used to the temperature difference. A contrasting shower not only helps you lose weight but also provides enough energy for the rest of the day.

Cook a tablespoon of St. John’s wort in two glasses of water for 3 minutes, then strain a glass of boiled cold water. Drink ¼ of this tea on an empty stomach in the morning 25-30 minutes before the first meal.  Do it for 3-5 days, then take a break for 3 days, drink tea again for 5 days, and then stop. You can repeat this process in a month or two. This tea improves metabolism very well!

Water Freedom System – Energy management in buildings with heat meters

Source: Ardurra

Given the increased emphasis on the use of fossil fuels and carbon dioxide emissions, it is necessary to control energy consumption in all types of buildings. Water Freedom System Amazon It was found that 45 percent. The energy consumed in the UK is used for heating buildings, cooling buildings, hot water, communication equipment, lighting, and cooking. Managing and reducing these channels is crucial to reducing our carbon footprint.

Heating, cooling and hot water control can be supported by ultrasonic heat meters. Water Freedom System Water Supply These instruments can monitor and record fluid flows and temperatures through construction pipes. By measuring the heat transferred through the structure at various points and determining the peak load moments, engineers can develop accurate wear and distribution models. Based on this data, engineers and building managers can plan changes to heating systems to optimize energy consumption.


Various types of heat meters are available and the choice of application depends on the monitoring time required, the cost or impact of the current system failure, installation costs and so on. Clamps are available that attach to the outside of the pipe and are much cheaper. They do not necessarily have to be punctured or subsequently sealed. 

They can easily be attached to the pipe. Also, the pipe must not be empty and unused to prevent downtime. Another advantage is that during maintenance of the meter all working parts fall out of the pipes, which allows dry maintenance.

If monitoring is to be carried out for a long time and is suitable for continuous installation, there are built-in heat meters that can be configured and connected to the recording equipment. As a result, the pipes must be broken and installation and standstill factors must be taken into account.

Leave a Reply

Your email address will not be published. Required fields are marked *